Epoxy Grout Liquid

Antel Epoxy Grout Liquid is a specialised low viscosity epoxy designed to address the challenges of sealing fine cracks in concrete, particularly in damp conditions. This high-performance grout excels in penetrating even the smallest cracks, ensuring a robust and long-lasting repair.

Unlike other epoxy products, Antel Epoxy Grout Liquid is formulated to displace water, making it highly effective in sub-floor environments where moisture is prevalent. This characteristic allows it to penetrate deeper into damp concrete compared to completely dry surfaces, ensuring a more comprehensive and effective repair.

Key Features:

🔹 High Penetration: Excellent for fine cracks in damp concrete, providing superior coverage and repair.

🔹 Strength: Offers adhesive, compressive, and tensile strengths that far exceed those of concrete itself.

🔹 Fast Curing: Quick setting with a hard cure in 24-36 hours and full cure in 7 days at 20°C.


Packaging: Supplied in twin-pack sets for either 500 ml or 1 litre of mixed material.

Shelf Life: 12 months in sealed containers.

Preparation: Ensure surfaces are clean and free of loose material. Remove excess water but the surface does not need to be completely dry.

Mixing: Combine the two-pack materials (Pack A and Pack B) by pouring Pack B into Pack A. Stir slowly until the mixture is homogeneous.

Application: Apply the mixture by saturating the surface until it ceases to absorb.

Curing: Allow the grout to cure with a pot life of 90-120 minutes at 20°C, a hard cure within 24-36 hours, and a full cure in 7 days.

Tool Cleaning: Clean tools and equipment immediately after use with Antel Cleaning Solvent.

See technical data sheet for full information.

Epoxy Grout Liquid Technical Data Sheet

1. DESCRIPTION

Antel Epoxy Grout Liquid is low viscosity material designed for pressure injection into very fine cracks in concrete. It has the ability to chase away water, thus ensuring that adequate penetration takes place even at sub-floor levels where concrete is usually damp. It has been proven that Epoxy Grout Liquid will penetrate further into damp concrete than into completely dry concrete.

2. PACKAGING

Supplied in twin-pack sets sufficient to provide either 500 ml or 1 litre of mixed material.

3. STRENGTH

The adhesive, compressive and tensile strengths far exceed the strength of concrete.

4. SHELF LIFE

12 months in sealed containers

INSTRUCTIONS FOR USE

1. PREPARATION
Epoxy Grout Liquid should be applied to surfaces that are clean and free of any loose or flaking material. Free water should be removed the surface but there is no need for the surface to be dry.

2. MIXING
Epoxy Grout Liquid is supplied as a two-pack material comprising of two liquid packs marked A and B. The contents of Pack B should be emptied into the container marked A and the mixture stirred on a slow speed until mixing is complete.

3. APPLICATION
The usual method of application is by surface saturation which should continue until the Grout ceases to penetrate.

4. CURING
Pot Life 90-120 minutes at 20°C
Hard Cure within 24 - 36 hours at 20°C
Full Cure - 7 days at 20°C

5. TOOL CLEANING
Immediately after use, brushes, tools and equipment should be cleaned using Antel Cleaning Solvent.

Speedy delivery is our promise! Expect your order to arrive promptly, typically between 24-48 hours, thanks to our efficient service.