Low Viscosity Grout

Antel Low Viscosity Grout is a top-quality, low viscosity epoxy designed to address fine cracks in concrete surfaces. This grout offers exceptional penetration, ensuring that even the smallest fissures are thoroughly sealed and reinforced. It is particularly effective in applications where concrete may be damp, as it has the capability to displace water and adhere securely.

Benefits:

🔹 Deep Penetration: Its low viscosity allows it to flow into very fine cracks, ensuring comprehensive repair and long-lasting durability.

🔹 Superior Bond Strength: The grout forms a bond stronger than the concrete itself, providing a robust repair that withstands stress and wear.

🔹 Versatile Application: Can be used on both dry and damp surfaces, making it adaptable to various conditions.

Packaging: Available in two-pack sets for either 500g or 1 kg of mixed material.

Strength: Provides adhesive, compressive, and tensile strengths that far exceed the inherent strength of concrete.

Shelf Life: 12 months in sealed containers.

Preparation: Ensure the surface is clean, free from loose or flaking material, and remove any free water. The surface does not need to be completely dry.

Mixing: Combine the contents of Pack B into the container marked Pack A. Stir thoroughly until the mixture is homogeneous.

Application: Apply the grout by saturating the surface until no further penetration occurs. This ensures full coverage of the cracks.

Curing: The grout has a pot life of 30-45 minutes at 20°C. It will harden within 24-36 hours and reach full cure in 3-4 days at 20°C.

Low Viscosity Grout Technical Data Sheet

1. DESCRIPTION

Antel Epoxy Low Viscosity Grout is a very low viscosity material used for sealing very fine cracks in concrete. It has superb penetration into fine cracks and as in our Epoxy Grout has the ability to chase away water and penetrate damp concrete.

2. PACKAGING

Supplied in two pack sets sufficient to provide either 500g or 1 kg of mixed material.

3. STRENGTH

The adhesive, compressive and tensile strengths far exceed the strength of concrete.

4. SHELF LIFE

12 months in sealed containers

INSTRUCTIONS FOR USE

1. PREPARATION

Epoxy Low Viscosity Grout should be applied to surfaces that are clean and free of any loose or flaking material. Free water should be removed from the surface but there is no need for the surface to be dry.

2. MIXING

Epoxy Low Viscosity Grout is supplied as a two-pack material comprising of two liquid packs marked A and B. The contents of Pack B should be emptied into the container marked A and the mixture stirred until mixing is complete.

3. APPLICATION

The usual method of application is by surface saturation which should continue until the Grout ceases to penetrate.

4. CURING

Pot Life 30-45 minutes at 20°C
Hard Cure within 24-36 hours at 20°C
Full Cure 3-4; days at 20°C

5. TOOL CLEANING

Immediately after use, all brushes, tools and equipment should be cleaned using Antel Cleaning Solvent.

Speedy delivery is our promise! Expect your order to arrive promptly, typically between 24-48 hours, thanks to our efficient service.