Swimming Pool Paint for Concrete Pools

Useful Links

- PoolCoat Coverage Calculator: Work out how many packs you'll require.

- PoolCoat Clear Anti-Slip: For anti-slip areas such as steps.

- PoolCoat Maintenance Pack: For small touch ups.

What is this swimming pool coating?

Antel PoolCoat System 10 is a premium epoxy pool paint 3 coat system made up of two coloured base coats and a final clear protective layer. Once cured, it forms a tough, waterproof surface designed for continuous immersion in treated pool water.

This epoxy swimming pool coating is suitable for both new builds and repainting projects, helping restore and protect pools for years to come.

Key benefits
- Long-lasting epoxy pool paint for concrete pools
- Waterproof coating designed for permanent water immersion
- Resistant to pool chemicals, UV exposure, and weathering
- Smooth, high-gloss finish that is easy to maintain
- Suitable for domestic pools and commercial refurbishment projects in the UK

Suitable surfaces

This swimming pool paint for concrete pools is ideal for:

- Concrete swimming pools
- Rendered and masonry pool surfaces
- Marbelite finishes
- Pools requiring durable waterproof coatings

What’s included

Each pack of Antel pool paint contains:

2 x 5L coloured epoxy base coats (A + B packs)
1 x 3kg clear protective top coat (A + B pack)

For rough, porous, or saltwater pools, a second clear coat is recommended to maximise durability and lifespan.

For detailed instructions and safety information, please refer to the product data sheet.

How to Use PoolCoat System 10

PoolCoat System 10 swimming pool paint is applied as a three coat epoxy system consisting of two coloured coats followed by one clear protective coat.

Here's a quick guide on how to use it:

1. Preparation: Ensure the surface is clean, dry, and free of debris. Repair any cracks or leaks.

2. Mixing: Mix the A and B packs thoroughly for at least 3 minutes.

3. Application: Apply the first coat using a medium pile roller or brush. Wait 24 hours before applying the second coat. Apply the final clear coat after another 24 hours using a foam roller.

4. Curing: Allow 3-7 days (depending on temperature) for the coating to fully cure before refilling your pool.

5. Cleaning:

When using spray equipment a thorough rinsing with cold water every hour will prevent a buildup of cured material. Brushes and rollers should be washed with cold water and detergent and rinsed thoroughly in cold water.

Application equipment used to apply the 3rd Clear Sealer Coat should not be cleaned with water, but simply allowed to cure/harden and then disposed of.

For detailed instructions and safety information, please refer to the product data sheet.

🔹 Coating: Three-coat system (two coloured coats and a final clear coat)

🔹 Coverage: 30-35 square meters per 5 litres on a non-porous surface

🔹 Pot life: 1.5 hours at 20°C

🔹 Drying time: Touch dry in 8 hours, hard dry in 12 hours

🔹 Full cure: 3-7 days

🔹 Chemical resistance: Excellent

STORAGE

Store in a cool, dry and frost free area in original containers. Protect from freezing. Keep out of the reach of children. A shelf life in excess of 12 months can be expected for unopened containers kept in the above conditions.

CLEANING EQUIPMENT

When using spray equipment a thorough rinsing with cold water every hour will prevent a buildup of cured material. Brushes and rollers should be washed with cold water and detergent and rinsed thoroughly in cold water.

Application equipment used to apply the 3rd Clear Sealer Coat should not be cleaned with water, but simply allowed to cure/harden and then disposed of.

HEALTH & SAFETY

Antel PoolCoat System 10 is much safer to handle than other resin systems; however, it is recommended that all skin contact is avoided and that if contact is made, are washed immediately with soap and warm water. It is advisable to use a barrier cream and gloves when applying.

Full technical details below

TECHNICAL DATA

Test Data @20°C:

Pot Life 1-1.5 hours
Touch dry 8 - 10 hours
Inter coat Period 24 – 48 hours
Foot traffic 24- 48 hours
Full Cure 3 – 7 days
Application Thickness 70 microns per coat
Ideal application temperature 15-20°C
Coverage 7 - 8m² per litre
Finish Gloss
% solids W/W 68
Viscosity @20°C spindle 3 20rpm 9.0 Pa.s
Specific Gravity @ 20°C 1.4
Maximum humidity for application 80%






For detailed instructions and safety information, please refer to the product data sheet.

Speedy delivery is our promise! Expect your order to arrive promptly, typically between 24-48 hours, thanks to our efficient service.