Pool Paint Clear Anti-Slip
Pool Paint Clear Anti-Slip
Used as part of Antel PoolCoat System 10 Swimming Pool Paint to provide an anti-slip finish that's ideal for steps. To be applied over the top of the second colour coat or third sealer coat.
Available in 1kg units and especially formulated to be used with Antel Swimming Pool Paint. Simply mix up the two components and lay over the top of Antel Swimming Pool Paint to achieve an anti-slip finish.
Supplied in 1kg units, comprising of an ‘A Pack’ and ‘B Pack’.
One 1kg unit is enough to cover 6-7sqm when going over a smooth surface.
No more than 48 hours after applying the second PoolCoating System 10 colour coat or clear coat, apply Pool Coat Clear Anti Slip. If more than 48 hours elapses then it will be necessary to sand the PoolCoating System 10 coat with a coarse grit sandpaper prior to applying Pool Coat Clear Anti Slip.
Do not apply in temperatures below 10 °C/50 °F and ensure there is at least a 4 hour weather window. We do not recommend application late in the day, due to dropping temperatures and increased humidity.
1. Mix A Pack thoroughly on a slow speed.
2. Mix B Pack thoroughly on a slow speed.
3. Pour B Pack into A Pack and mix thoroughly on a slow speed.
4. Pour mixed material into a roller tray and use a velour roller to apply.
5. Follow waiting time guidelines for Poolcoat System 10.
6. DRYING & CURING
At 20 °C, and with reasonable ventilation, the coating is touch dry in 8 hours and hard dry in 12 hours. Maximum cure, hardness and chemical resistance is obtained within 7 days.
7. TECHNICAL DATA
Pot life 1 – 1.5 hours
Touch dry 8 - 10 hours
Foot traffic 24- 48 hours
Full Cure 3 – 7 days
Application Thickness 70 microns per coat
Ideal application temperature 15-20°C
Coverage - 6 - 7m² per kg
Finish - Gloss
Test Data @20°C
Store in a cool, dry and frost free area in original containers. Protect from freezing. Keep out of the reach of children. A shelf life in excess of 12 months can be expected for unopened containers kept in the above conditions.
9. CLEANING EQUIPMENT
Application equipment used to should not be cleaned with water, but simply allowed to cure/harden and then disposed of.
10. HEALTH & SAFETY
Antel PoolCoat System 10 is much safer to handle than other resin systems; however, it is recommended that all skin contact is avoided and that if contact is made, are washed immediately with soap and warm water. It is advisable to use a barrier cream and gloves when applying.
FOR FULL DETAILS PLEASE REFER TO HEALTH & SAFETY DATA SHEET.
The level of anti-slip is usually suitable for pool steps though this can depend on the pool substrate and the end usage.
Antel cannot be held responsible for the anti-slip performance. Different grades of anti-slip are available (click here), but Antel are unable to advise on the suitability and highly recommend performing anti-slip testing before applying to a large area.