Skip to product information
1 of 1

★★★★★ Rated 5 stars

SBR Waterproof Bonding Agent

SBR Waterproof Bonding Agent

Regular price £12.75
Regular price Sale price £12.75
Sale Sold out
ex VAT. Shipping and VAT calculated at checkout.

Antel Waterproof Bonding Agent enhances cementitious mixes for superior performance and durability.

✅  Improves Strength: Enhances the load-bearing capacity.
✅  Boosts Flexibility: Reduces cracking and increases adaptability.
✅  Enhances Chemical Resistance: Protects against harsh substances.

More Information


Antel Waterproof Bonding Agent is a specialised aqueous dispersion of fine Styrene-Butadiene copolymers, designed to enhance cementitious mixtures. Its formulation includes a cement emulsion stabiliser, a defoamer, a surfactant, and a setting/hardening controlling agent to optimise performance.

This product significantly improves various aspects of cementitious mixes:

🔹 Strength: Increases the compressive and tensile strength of cement-based applications.

🔹 Workability: Enhances the ease of mixing and application.

🔹 Chemical Resistance: Provides better protection against chemicals and environmental factors.

🔹 Crack Resistance: Minimises the occurrence of cracks in the final application.

🔹 Abrasion Resistance: Increases the durability against wear and tear.

🔹 Flexibility: Adds flexibility to accommodate movement and reduce cracking.

Coverage: 6.5 to 13 litres per 50 kg of cement.
Packaging:

Available in 2.5 ltrs, 5 ltrs, and 25 ltrs non-returnable containers.

How to Use

Selection of Materials: Use only fresh cement and aggregates that meet British Standards.

Preparation: Ensure the substrate is clean, structurally sound, and free of contaminants.

Mixing: Combine the Antel Waterproof Bonding Agent with cement and sand using a cement mixer. Adjust water content based on consistency.

Application: Moisten the substrate and apply the mixture. For high-stress environments or smooth surfaces, apply a primer and use a wet-on-wet method.

Recommended Compositions:

- Thin Flooring Screeds: 50 kg cement, 125 kg sand, 7.5 litres bonding agent, and water.

- Heavy Duty Flooring Screeds: 50 kg cement, 62 kg sand, 62 kg granite chippings, 7.5 litres bonding agent, and water.

- Weatherproofing and Bonding: Adjust the mix based on the specific requirements.

Technical Information

SBR Waterproof Bonding Agent Technical Data Sheet

1. DESCRIPTION

Antel Waterproof Bonding Agent is an aqueous dispersion of very fine Styrene-Butadiene copolymers. It is modified with a cement emulsion stabiliser and a defoamer. It also incorporates a surfactant and setting/hardening controlling agent.

2. USES

In cementitious mixes it improves:-
Strength
Work ability
Chemical resistance
Crack resistance
Abrasion resistance
Flexibility

3. PROPERTIES

Type of polymer - Styrene Butadiene
Emulsion Stabiliser - Non-Ionic
Solids Content - 50%
Specific Gravity - 1.01
Ph Value - 10.5
Particle Size - 2200 A units
Frost Resistance - 5 cycles (-15°C to 25°C)
Shelf life - 1 year

4. COVERAGE

6.5 to 13 litres per 50 Kgs cement

5. PACKAGING

2.5 ltrs, 5 ltrs and 25 ltrs sizes.
Non returnable containers.

6. HEALTH & SAFETY

This material is non hazardous in normal use. Avoid contact with skin and eyes. Wash splashes immediately with copious amounts of water. If irritation persists seek medical advice. Keep out of reach of children. Please consult Health & safety
sheet for complete details.

7. INSTRUCTIONS FOR USE.

7 a. SELECTION OF MATERIALS

Care must be taken in the quality of materials. Use only FRESH cement. Aggregates should conform to the relevant British Standard.

7 b. PREPARATION

The substrate must be structurally sound, dust free and clean. All traces of contamination must be physically removed.

7 c. MIXING

Intensive mixing is important and is best carried out using a cement mixer. The addition of Waterproof Bonding Agent is simplest in the form of Waterproof Bonding Agent/water mixture to cement/sand mixture. Refer to specific mixture.

7 d. APPLICATION

The sound and clean substrate should be moistened with water prior to application of the Primer.

7 e. PRIMING

Priming for areas subjected to high stress environments or on smooth surfaces, must be worked into the substrate vigorously by using a broom or brush. The subsequent mortar layer must be applied whilst the primer is still wet. (Wet on wet).

8. RECOMMENDED COMPOSITIONS

8 a. Thin flooring screeds and patch repair.

50 kg Portland Cement
125 kg Zone 2 sand
7.5 litres Antel Waterproof Bonding Agent
Approximately 10 litres of water, but as Antel Waterproof Bonding Agent has a considerable plasticising action do not add full quantity of water until mixing of ingredients is complete.

8 b. Heavy duty flooring screeds.

50 kg Portland Cement
62 kg Zone 2 sand
62 kg 3 mm granite chippings
7.5 litres Antel Waterproof Bonding Agent
Approximately 10 litres of water, but as Antel Waterproof Bonding Agent has a considerable plasticising action do not add full quantity of water until mixing of ingredients is complete.

8c. Weatherproofing, Bonding, Brick slips, Copings and Tiles.

Surfaces should be clean, sound and free of grease, oil or loose material which would be detrimental to a good bond. Crumbly or otherwise unsound patches should be removed and the surface made good. All surfaces should be washed free of dust and thoroughly damped before the application of the recommended primer coat.

Primer should be applied to the substrate surface and to the bonding surface of the brick slip, tile etc. Whilst the primer coats are still wet, bed the unit into a latex modified cement mortar. Vertical applications will require support for a minimum of 24 hours.
Recommended formulations:
50 kg Portland Cement
125 kg Zone 2 sand
10 litres Antel Waterproof Bonding Agent
Approximately 6-8 litres of water. Since Antel Waterproof Bonding Agent has a considerable plasticising action do not add full quantity of water until mixing of ingredients is complete.
The thickness of latex modified cement mortar renderings should be restricted to about 7 mm for each coat or sagging of the coating may occur. Multi coats may however be applied in relatively quick succession - typically 30 - 60 minutes. It is only necessary to allow each coat to set off adequately to receive the subsequent layer. If the main purpose of the renderings is to achieve water resistance it is recommended that the concentration of Waterproof Bonding Agent is increased to a level of 30 - 40 parts per 100 parts of cement.
NB For increased water resistance, the level of Waterproof Bonding Agent addition may be increased to as much as 20 litres. Please reduce the level of water addition accordingly.
Recommended formulations for general purpose wall rendering.
50 kg Portland Cement
150 kg Zone 2 sand
8.5 litres Antel Waterproof Bonding Agent
Approximately 10 litres of water, but as Antel Waterproof Bonding Agent has a considerable plasticising action do not add full quantity of water until mixing of ingredients is complete.

9. MIXING

Mixing is normally carried out in a concrete mixer but can be done by hand. Premix the sand and cement in the mixer. Pour in just less than the calculated amount of water followed by the Antel Waterproof Bonding Agent. Allowance must be made for the water content of the Waterproof Bonding Agent which is 55.5%. Mix for 2 - 3 minutes and finally add the remaining water little by little until the required consistency is achieved. Over addition of water causes rapid thinning of the latex modified cement mortars owing to the efficient plasticising effect of the latex. Because of this plasticising effect, total water content for latex modified cement mortars will
be less than for unmodified systems for a given degree of Work ability. Over mixing the Latex Modified cement mortar may cause degradation of the defoamimg system with a consequent increase in air entrainment.

10. PRIMING COATS

The application of a priming coat is normally recommended to obtain maximum adhesion to the substrate. The prepared surface should be thoroughly damped with water but any free standing water should be removed. A primer consisting of 2 parts Portland cement slurried with 1 part Antel Waterproof Bonding Agent by volume should be vigorously worked into the surface with a brush or stiff broom. The topping must be applied to the final primer coat whilst the latter is still in a wet condition.

Latex/Water¹ Cement/Sand
Screeds/Pavings Patching Mortar 1:1 to 1:3 1:2 to 1:3

Levelling Mortar/Smooth Coats Joint mortar (rigid) 1:1 to 1:2 1:1 to 1:3

Bonding Mortar/
Priming Coats 1:1 1:1 to 1:2

Adhesive Mortar for wall & floor tiles 1:2 to 1:3 1:2 to 1:3

Adhesive mortar for insulating boards or sheets 1:2 to 1:3 1:2

Plaster/Renderings 1:2 to 1:4 1:3 to 1:4

1 layer plasters on polystyrene boards 1:1 to 1:2 1:2

Cement slurry impregnations of bituminous pavings 1:2 to 1:3 1:1

11. GENERAL PURPOSE AND WATERPROOF WALL RENDERINGS

The wall surface must be free from all loose and crumbly material. Ensure that all concrete, brick or similar surfaces are in a sound and clean condition. It is usually sufficient that the surfaces are prepared using a wire brush to remove old paint and dusty patches. Holes and damaged areas must be made good with latex modified mortar and allowed to dry. The surface should then be washed or hosed to remove dust. It is recommended that a priming coat is applied as previously described.

12. THIN FLOORING SCREEDS, PATCHING FLOORS, HEAVY DUTY FLOORING SCREEDS.

In addition to removing all loose and crumbly material from existing substrate it is essential that all contaminations such as oil or grease be thoroughly eradicated. It may be necessary to remove up to 5 cms of substrate if the concrete has been saturated in oil.
Substrate saturated with sugar or other fermentation products should not be resurfaced until the contaminated area has been removed.
For new floors to which a levelling screed needs to be laid it may still be desirable to remove the upper surface layer to ensure that weak surface laitance is not present. This may be achieved by light mechanical scrabbling or etching with a dilute hydrochloric acid. All traces of acid must be removed by thoroughly washing the surface.
Under no circumstances should existing cracks be covered over or bridged with Latex Modified Cement Mortars. Cracks must be dug out to a minimum depth of 5 cms and filled with a latex modified patch repair mortar during the resurfacing operation.
Existing expansion joints should be extended through the latex mortar overlayment.

Quantity of latex is determined by the strain and the thickness of the layer (high strain and thin layers = higher latex dosage).
For a w/c ration of 0.46 (=medium processing consistency) the following polymer contents (dry) with respect to the cement are found:
1:1 approx. 13%
1:2 approx. 8%
1:3 approx. 6%
1:4 approx 5%

13. PLACEMENT

The concrete substrate should be kept damp with water for one hour prior to placing the latex modified cement mortar. This will control the temperature and the suction rate of the slab. There should be no free standing water on the surface. The application of a priming coat as previously described is normally recommended to obtain maximum adhesion of the screed. The latex modofied cement mortar toppimg is applied to the wet priming coat. Over finishing should be avoided. Areas subjected to fast drying should be covered with damp burlap or white pigmented polyethylene sheeting for 24 - 48 hours after placing.
Latex modified floors may be opened to foot traffic after 24 hours and heavy traffic after 2 - 4 days.

Adhesive Mortar for
wall & floor tiles 1:2 to 1:3 1:2 to 1:3
Adhesive mortar for
insulating boards or
sheets 1:2 to 1:3 1:2
Plaster/Renderings
1 layer plasters on 1:2 to 1:4 1:3 to 1:4
polystyrene boards 1:1 to 1:2 1:2
Cement slurry
impregnations of
bituminous pavings 1:2 to 1:3 1:1


TYPICAL PROPERTY IMPROVEMENTS USING ANTEL WATERPROOF BONDING AGENT
IMPROVEMENTS SHOWN IN BRACKETS.

Delivery

Speedy delivery is our promise! Expect your order to arrive promptly, typically between 24-48 hours, thanks to our efficient service.

View full details

3 Steps to perfect application

  • ☑️ Finalise your choice

    Choose the appropriate size and colour for your project. Need help choosing? Our friendly team are here to help - contact us!

  • ☑️ Order your chosen product

    Once you've finalised your order head to the checkout to complete your purchase. Your order will be dispatched within 24-48 hours.

  • ☑️ Apply your product with ease

    Our easy-to-use formulas make application a breeze. Follow the manufacturer's instructions for a flawless finish.

Why choose Antel for your mortars, resins & grouts?

At Antel, we're your one-stop shop for all your building chemical needs. Here's why you should choose us:

  • 🌟 Unmatched expertise

    We have over 20 years of experience in formulating and manufacturing high-performance building chemicals.

  • 👍 Superior products

    Our mortars, resins, and grouts are designed for ease of application, long-lasting durability, and minimal environmental impact.

  • 🚀 Fast delivery

    Get your project started quickly! Most orders are dispatched within 24-48 hours for fast delivery within the UK

epoxy mortar before and after images

★★★★★

Benson Beds

Our epoxy mortar was used to repair damaged floors in their storage facility. This aging commercial estate suffered floor damage from heavy traffic. Our before-and-after images show dramatic improvement, proving our solution for a safer workspace.

Dedicated support

Our technical team is always happy to offer advice and guidance on choosing the right product and ensuring proper application.

Talk to an expert

FAQs

What makes antel's mortars, resins & grouts different?

Our products are formulated with over 20 years of experience for superior ease of use, long-lasting durability, and minimal environmental impact.

How do I choose the right mortar, resin, or grout for my project?

We offer a wide selection! Our dedicated technical team is happy to answer your questions and help you find the perfect product for your specific needs. Feel free to contact us!

How fast can I get my order?

Most orders are dispatched within 24-48 hours for fast delivery within the UK (additional charges may apply). We also handle international shipping!

Can I still get help if I'm unsure during my project?

Absolutely! Our technical support team is always happy to offer guidance on proper application to ensure flawless results.

Are Antel's products environmentally friendly?

Yes! We take environmental responsibility seriously and strive to create high-performance products with minimal environmental impact.

Need Help Choosing Mortars, Resins & Grouts?

Our technical team is here to assist! Whether you're unsure which product is right for your project or have questions about using Antel mortars, resins, or grouts, we're happy to help. Feel free to contact us!