Pool Paint Clear Anti-Slip

Useful Links

- PoolCoat Coverage Calculator: Work out how many packs you'll require.

- PoolCoat Clear Anti-Slip: For anti-slip areas such as steps.

- PoolCoat Maintenance Pack: For small touch ups.

Available in 1kg units and especially formulated to be used with Antel Swimming Pool Paint. Simply mix up the two components and lay over the top of Antel Swimming Pool Paint to achieve an anti-slip finish.

For detailed instructions and safety information, please refer to the product data sheet.

PREPARATION
No more than 48 hours after applying the second PoolCoating System 10 colour coat or clear coat, apply Pool Coat Clear Anti Slip. If more than 48 hours elapses then it will be necessary to sand the PoolCoating System 10 coat with a coarse grit sandpaper prior to applying Pool Coat Clear Anti Slip.

Do not apply in temperatures below 10 °C/50 °F and ensure there is at least a 4 hour weather window. We do not recommend application late in the day, due to dropping temperatures and increased humidity.

APPLICATION
1. Mix A Pack thoroughly on a slow speed.

2. Mix B Pack thoroughly on a slow speed.

3. Pour B Pack into A Pack and mix thoroughly on a slow speed.

4. Pour mixed material into a roller tray and use a velour roller to apply.

5. Follow waiting time guidelines for Poolcoat System 10.


DRYING CURING
At 20 °C, and with reasonable ventilation, the coating is touch dry in 8 hours and hard dry in 12 hours. Maximum cure, hardness and chemical resistance is obtained within 7 days.

CLEANING EQUIPMENT
Application equipment used to should not be cleaned with water, but simply allowed to cure/harden and then disposed of.

For detailed instructions and safety information, please refer to the product data sheet.

PACKAGING
Supplied in 1kg units, comprising of an ‘A Pack’ and ‘B Pack’.

COVERAGE
One 1kg unit is enough to cover 6-7sqm when going over a smooth surface


DRYING & CURING
At 20 °C, and with reasonable ventilation, the coating is touch dry in 8 hours and hard dry in 12 hours. Maximum cure, hardness and chemical resistance is obtained within 7 days.


7. TECHNICAL DATA
Pot life 1 – 1.5 hours
Touch dry 8 - 10 hours
Foot traffic 24- 48 hours
Full Cure 3 – 7 days
Application Thickness 70 microns per coat
Ideal application temperature 15-20°C
Coverage - 6 - 7m² per kg
Finish - Gloss
Test Data @20°C

STORAGE
Store in a cool, dry and frost free area in original containers. Protect from freezing. Keep out of the reach of children. A shelf life in excess of 12 months can be expected for unopened containers kept in the above conditions.

CLEANING EQUIPMENT
Application equipment used to should not be cleaned with water, but simply allowed to cure/harden and then disposed of.


HEALTH & SAFETY
Antel PoolCoat System 10 is much safer to handle than other resin systems; however, it is recommended that all skin contact is avoided and that if contact is made, are washed immediately with soap and warm water. It is advisable to use a barrier cream and gloves when applying.

FOR FULL DETAILS PLEASE REFER TO HEALTH & SAFETY DATA SHEET.

NOTE
The level of anti-slip is usually suitable for pool steps though this can depend on the pool substrate and the end usage.

Antel cannot be held responsible for the anti-slip performance. Different grades of anti-slip are available (click here), but Antel are unable to advise on the suitability and highly recommend performing anti-slip testing before applying to a large area.

For detailed instructions and safety information, please refer to the product data sheet.

Speedy delivery is our promise! Expect your order to arrive promptly, typically between 24-48 hours, thanks to our efficient service.