Fungicidal Wall Solution M:E Concentrate

Fungicidal Wall Solution Technical Data Sheet

1. DESCRIPTION

Antel Fungicidal Wall Solution (masonry biocide) is a true waterbased, solvent free micro emulsion having all the benefits of first and second generation biocides with none of the disadvantages. It does not contain any petroleum based solvents, glycol or glycol ethers or inorganic chlorides which are normally required to stabilise micro emulsions. Its technology gives rise to properties such as excellent penetration, low odour to odourless and non hazardous dilution therefore making Antel Fungicidal Wall Solution the latest and most effective masonry treatment.

2. USES

For use only as a surface biocide.

3. PACKAGING

Individual 1 litre containers. 15 x 1 litre containers per case.

4. USAGE RATE

1 litre of diluted fluid per 2 - 5 square metres.

5. STORAGE & HANDLING

Handling: Avoid contact with the eyes and skin. Use PVC gloves, goggles, respirator, protective overalls and footwear.
Exposure: Only to be used by trained operatives. No unprotected persons or animals to be allowed in treated areas for up to 8 hours after application and until treated area is dry.
Shelf life: 12 months in unopened containers.
Storage: Store in cool dry conditions in original containers. Protect from freezing. Keep out of reach of children.
Occupational Limits:
3-Iodo-2-Propynyl-Butyl-Carbamate - LD5O RAT (oral) = 1470 mg/kg. LD50 RAT (dermal) › 2000 mg/kg.
Allow 8 hours with maximum ventilation before reoccupation.

6. DILUTION

1 litres of concentrate product diluted with 24 litres of clean water.
For injection, dilute 2 litres of concentrate with 23 litres of clean water.

7. MIXING

Mix the contents with cold clean water in a 25 litre plastic container. Close the lid tightly and shake thoroughly to ensure complete mix.