Epoxy ClearCoat Resin

Antel Epoxy ClearCoat Resin is a clear, high gloss, two part epoxy coating with a high level of resistance to UV, substantially reducing the amount of yellowing that occurs when compared with other epoxy products. Epoxy ClearCoat Resin is very hardwearing, resistant to chemicals and compatible with most solvent free paint types.

More details

New product

£ 27.68

- +

 
More info

1. DESCRIPTION

Antel Epoxy ClearCoat Resin is a clear, high gloss, two part epoxy coating with a high level of resistance to UV, substantially reducing the amount of yellowing that occurs when compared with other epoxy products. Epoxy ClearCoat Resin is very hardwearing, resistant to chemicals and compatible with most solvent free paint types.

2. USES

Antel Epoxy ClearCoat Resin can be used virtually anywhere that requires a clear, hard-wearing coating. Some of its popular uses are below:

  • Penny floors
  • Sealing bar tops and tables
  • Decorative glossy finishes and effects
  • Scaling polished concrete

3. PACKAGING

1kg & 3kg.

4. COVERAGE

This is highly dependent on the application thickness.  Please see the below table to work out the coverage for your application usage:

Application Thickness

Estimated Coverage

0.1mm

10 m²/kg

0.25mm

4 m²/kg

0.5mm

2 m²/kg

1mm

1 m²/kg

2mm

0.5 m²/kg

Multiple coats are required for thicknesses above 2mm.

5. PREPARATION

For surfaces that are already painted, make good the surface and then sand and clean the existing paint or coating to ensure a sound base.  Particular attention should be made to degreasing surfaces before application.

Do not use any PVA coating on the substrate prior to application, as this will result in the paint peeling off. 

All voids and surface imperfections must be carefully filled.

6. MIXING

If splitting packs into smaller quantities, this must be carried out accurately using digital scales.

  1. Pour the entire contents of the smaller container, marked ‘B Pack’ into the larger container making sure to scrape out as much as possible.

  2. Mix thoroughly, using a drill and paddle. Once combined, mix for a further 2-3 minutes to ensure complete uniformity.

  3. Pour into at least two roller trays to maintain pot life and dissipate heat.

The coating is now ready to apply immediately to the prepared areas.

7. APPLICATION

  • Do not apply in temperatures below 10 °C.

  • The pot life for this coating is 45 minutes at 20°C.  Warmer temperatures will reduce the pot life of the coating, which is why we recommend application takes place mid-morning when being used outdoors.

  • When being applied outdoors, ensure there is at least a day of dry weather before starting application.

  • Once mixed, it is only possible to apply a single coat. Do not attempt to return to the mix to apply a second coat.

  • Use a plum line when applying over a large area to ensure no spots are missed.

  • Apply using a foam roller, fine pile roller or notched trowel/squeegee depending on the desired application thickness

  • After applying, wait 3-7 days (depending on temperature) before heavy traffic.

8. DRYING & CURING

At 20 °C, and with reasonable ventilation, the coating is touch dry in 8 hours and hard dry in 12 hours. Maximum cure, hardness and chemical resistance is obtained within 7 days.

9. TECHNICAL DATA

Test Data @20°C

Pot life

30 minutes

Application thickness

200-225 µm per coat

Initial cure

8 – 10 hours

Intercoat time

24 hours

Pedestrian traffic

24 hours

Heavy traffic

36 hours

Full Cure

7 days

Compressive Strength

65 N/mm2

Flexural Strength

26 N/mm2

Abrasion Resistance

0.18 grams weight loss

CS-17 wheel 1000 cycles

1 kg

10. STORAGE

Store in a cool, dry and frost free area in original containers. Protect from freezing. Keep out of the reach of children. A shelf life in excess of 12 months can be expected for unopened containers kept in the above conditions.

11. CLEANING EQUIPMENT

When using spray equipment a thorough rinsing with cold water every hour will prevent a buildup of cured material. Brushes and rollers should be washed with cold water and detergent and rinsed thoroughly in cold water. 

Application equipment used to apply the 3rd Clear Sealer Coat should not be cleaned with water, but simply allowed to cure/harden and then disposed of.

12. HEALTH & SAFETY

Antel Epoxy ClearCoat Resin is much safer to handle than other resin systems; however, it is recommended that all skin contact is avoided and that if contact is made, are washed immediately with soap and warm water. It is advisable to use a barrier cream and gloves when applying.

FOR FULL DETAILS PLEASE REFER TO HEALTH & SAFETY DATA SHEET.

A Note from Antel

We make every attempt to provide as much information as possible on the mixing and application of Antel’s Epoxy ClearCoat Resin, however, if there is something you are not sure of, or if you have a particular request or problem, please don’t hesitate to contact us and we will only be too happy to help.  Antel is committed to providing a superior before and after sales service.

Write a review

Epoxy ClearCoat Resin
Antel Epoxy ClearCoat Resin is a clear, high gloss, two part epoxy coating with a high level of resistance to UV, substantially reducing the amount of yellowing that occurs when compared with other epoxy products. Epoxy ClearCoat Resin is very hardwearing, resistant to chemicals and compatible with most solvent free paint types.

Write a review

 
Comments(0)

No customer reviews for the moment.

11 other products in the same category:

No products

To be determined Shipping
£ 0.00 Total

Prices are tax excluded

Check out