Professional concentrated product containing an insecticide & fungicide combination to eradicate and prevent attack by wood boring beetles and prevent wood destroying & discolouring fungi.
Permethrin31.25g/L:A commonly used pyrethroid insecticide which has excellent efficacy against a wide range of wood boring insects.
Propiconazole 93.75g/L: A triazole fungicide, which has excellent efficacy against a range of wood destroying fungi.
IPBC (3-Iodo-2-Propynyl Butyl Carbamate) 31.25g/L: a carbamate fungicide which is added to improve the efficacy envelope even further providing excellent efficacy against a range of wood staining fungi.
The active ingredients in the formulation are sourced from and supplied by manufacturers who have supported their compounds through the Biocidal Products Directive [98/8 EC] or more recently the Biocidal Products Regulations [528/2012] and in compliance with Article 95 of the Biocidal Products Regulation.
LignumPro D156 is being supported under the European Biocidal Products Regulation [528/2012]. Efficacy of this product has been proven to industry established and European standards.
Hazard class: Class 1, 2 & 3*
*Timbers in hazard class 3 must be over coated with a weather proof finish to prevent leaching of active ingredient into the environment.
Pre-Application: Wood should be clean and free from wood dust and other contaminants.
Application: Low pressure spray or brush.
1L + 24L water : 200ml/m2 (1L per 5m2)
2L + 23L water : 100-300ml/m2 (1L per 3.3 - 10m2)
*1L of concentrate treats 82.5 - 250m2 of timber depending on use.
Drying: Product is touch dry in 1 hour depending on wood and ambient conditions. Unprotected persons and animals should be kept away from treated surfaces for 48 hours or until dry.
Finish: Product does not have a finish and leaves the same effect as applying water or solvent. It is always advisable to try on a small inconspicuous area before application to ensure product finish is as expected.
Over Coating: Product should be suitable for over coating 24 hours after application depending on wood and ambient conditions.
Clean Up: Rinse out spray equipment and save washings for use as diluents next time product is used. Remove most of product from brushes with tissue and wash brush with soap and clean water.
Stability: Product is stable in original packaging for 2 years whenstored under ambient conditions. After 2 years product should be re-tested every 6 months to ensure active ingredient levels are within specification.
Packaging: 1L HDPE bottles.10 x bottles per case.
50 x cases per pallet.
Storage: Protect from frost. Store between 5 and 40oc.
Store in original container.
Store away from food and/or feedstuffs.
Disposal: Dispose of waste product and contaminated packaging via a licensed waste disposal contractor.
Empty packaging should be rinsed out and be rendered useless by slitting and then placed in normal waste disposal. Hazardous waste key: 020108 - Agrochemical waste containing dangerous substances.
Classification & Labelling (1272/2008/EC) :
Signal word: Danger
Harmful if swallowed.
Causes serious eye damage.
May cause allergic reaction.
May cause damage to organs (larynx) through prolonged orrepeated exposure.
Very toxic to aquatic life with long lasting effects.