|8||£ 13.19||Up to £ 14.39|
|5||£ 13.49||Up to £ 7.50|
|3||£ 13.79||Up to £ 3.60|
|2||£ 14.24||Up to £ 1.50|
Plaster Board Bonding Enhancer Technical Data Sheet
Antel Plaster Board Bonding Enhancer is a one part product which improves the mechanical adhesion of plasters. It is an essential treatment for areas such as dense impervious surfaces (low suction backgrounds) and on high porous surfaces (high suction backgrounds). It is also commonly applied to medium suction backgrounds to ensure maximum adhesion.
· Low suction backgrounds
· Background preparation prior to plastering.
· Priming plasterboard.
Available in 2.5kg, 5kg and 25kg sizes - non returnable containers.
Keep containers tightly closed when not in use and store in warm, dry conditions above 4°C.
PROTECT FROM FREEZING.
Keep out of reach of children.
The surface must be of sound structure so as to provide support, clean, dry, frost free and free of releasing agents.
Antel Plaster Board Bonding Enhancer is supplied ready for use and should not be diluted unless it is being applied to medium suction backgrounds for which a dilution of one part Plaster Board Bonding Enhancer to three parts water should be used.
Apply using a suitable roller, brush or spray.
Antel Plaster Board Bonding Enhancer is quick drying. Plaster can be applied 24 hours after first applying the Bonding Enhancer (dependent on temperature and humidity.)
DO NOT USE BELOW 5°C.
Tools and equipment should be cleaned in water immediately after use. Do not allow to cure.